Regent SV278 Instrucciones página 6

SV278/SV278W I.S. 10/21/03
Mode of
operation:
6 Hour
NIGHT TIME ON
then Motion
Activated
Lights should turn
on automatically at
night 100% bright-
ness for 6 hours,
then reset to regu-
lar auto motion
setting for the
remainder of the
evening.
Dusk to Daw n
Setting
Override Mode
(activated only
at night)
Lights should stay
on 100% bright-
ness from dusk to
dawn and then
reset to the AUTO
or NIGHT TIME
ON setting next
dawn.
Continuous
Override Mode
(standard flood-
light setting)
Lights should stay
on continuously
both day and night
(must be reset
manually).
Return to Auto
or NIGHT TIME
ON Settings
(motion
activated)
From any of the
above settings.
11:12 AM Page 6
Set slide switch
on sensor to: p ower switch :
NIGHT TIME ON
6 HR
(6 Hours)
Note: Once the light has
Keep the power to
come on in the selected
the fixture on.
"Night Time On " mode, you
cannot change the mode
setting until the next dawn.
The light will operate in the
first "Night Time On" mode
selected (2 hour, 4 hour, or
6 hour), even if changed.
AUTO 4 MIN
Turn the power
or
AUTO 12 MIN
for 5 seconds then
or
ALL NIGHT TIME
ON MODES
Turn the power
TEST
for 5 seconds then
AUTO 4 MIN Turn the power
or
AUTO 12 MIN for at least 90
or
ALL NIGHT TIME
ON MODES
6
How to set How many times
LED will blink:
1 time
"OFF"
2 times
back "ON."
"OFF" 2 times
back "ON."
"OFF"
1 time
sec., then
back "ON."