Tornado 97060 CFV 10 Instrucciones De Seguridad Importantes página 7

To begin operating your Critical Filter Vacuum
(CFV), perform the following steps.
1. Ensure all filters are in place and properly se-
cured.
2. Place the head assembly on top of the tank
3. Engage the latches by pressing down (fig. 1)
4. Attach the hose to the tank (Fig. 2)
5. Slide the wand onto the hose
6. Twist the collar on the wand to lock the wand
onto the hose
7. Connect the extensions to the wand
8. Attach the desired accessory to the extension
9. Connect plug to a 120 volt 60Hz outlet and
switch on the unit
Fig. 1
Fig. 2
10. When finished, remove the hose by pushing
in on the RED button and pulling out on the hose
(Fig. 3)
To Change Filters
1. Ensure the unit is turned off and unplugged be-
fore attempting to change filters.
2. Release the latches
3. Remove the head assembly and place it upside
down on the tank assembly
4. Release filter retaining bracket (Fig. 4)
7
Fig. 3
Fig. 4