Power Linking - Chauvet DJ 4BRATri USB Guía De Referencia Rápida

4BAR™ Tri USB QRG
Product
Description
Product Overview
Footswitch
Overview
AC Power

Power Linking

Fuse
Replacement
The 4BAR™ Tri USB is a pack-and-go must have for DJs, bands and other performers
who want a complete LED wash light system, featuring wireless DMX control with the
convenient built in D-Fi™ USB port. The 4BAR™ Tri USB has high power tri-color
LEDs for an intense and uniform color output. The tri-color LEDS are perfect for front
lighting as they nearly eliminate multi-colored shadows. You can mount up to 4
additional products to the top of the 4BAR™ Tri USB with the built-in Edison plugs.
Power Out 1
Fuse Holder
Power In
DIP
Switch
This product has an auto-ranging power supply that can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
For the maximum number of 4BAR™ Tri USB products that you can power link at
each voltage, see the User Manual or the sticker on the product.
To replace the fuse in the 4BAR™ Tri USB:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
Microphone
D-Fi™ USB Port
Back Panel View
Power
Switch
3
Additional Product
Mounting Knob
LCD Display
Menu
Buttons
9-Volt Battery
Cover
EN
DMX
In/Out
Power Out 2