Dmx Linking - Chauvet DJ SlimBANKT18 USB Guía De Referencia Rápida

SlimBANK T18 USB QRG

DMX Linking

Starting
Address
Master/Slave
Connection
Infrared
Remote
Control
D-Fi USB
Connectivity
The SlimBANK T18 USB can work with a DMX controller when linked by DMX serial
connections. Instructions for DMX operation are in the User Manual. A DMX Primer is
available from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest recommended
DMX address is 500.
The SlimBANK T18 USB uses the DMX data connection for its Master/Slave mode.
Instructions for connecting and configuring this product for Master/Slave operation are
in the User Manual.
The SlimBANK T18 USB is fully compatible with the Infrared Remote Control (IRC-6)
from CHAUVET DJ For more information on the IRC-6 or to download instructions, go
to www.chauvetlighting.com.
The SlimBANK T18 USB is able to become a D-Fi wireless receiver/transmitter with
the use of the D-Fi USB from CHAUVET DJ. Simply set the DIP switch D-Fi
receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this
product for D-Fi USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port.
Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual
display control/menu buttons and IRC-6 will be unavailable until you unplug the
D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
6
EN