Changing The Password - Nivian ONV510 Manual De Instalación

5. Add the camera to the Smartphone App
Adding a camera can be done either by scanning its QR
code or by network search (LAN Search).
Start the application and press "Add camera", as shown in
the image below
If you are using the QR code then you only need to scan the
code on the base of the camera for this to be added to the
application. The default user is "admin" and the password is
"123456". Press "Done" to finish.
If you use the network search option (LAN Search) the
Smartphone will search for all cameras connected to the
same network domain. To add the cameras you only need
to select the camera from the list.

CHANGING THE PASSWORD

Before changing the password you should ensure that the
camera is connected and online.
To access the configuration menu press on the icon which
appears to the right of each camera, here you can modify
its parameters
Please note: If you forget the password you can reset the
camera by pressing and holding the reset button for over 10
seconds. This will reset the password to the default value.