Frequently Asked Questions - Marmitek Digital TV Anywhere Modo De Empleo

FREQUENTLY ASKED QUESTIONS

I do not get any signal.
x
Check if the units are connected to the mains and if the channel
setting [2] is the same on both units.
x
Check if both units are in the 'ON' position [6].
x
Check if the receiving TV is on the correct A/V channel.
The signal received is poor.
x
Try another channel (1, 2, 3 or 4; the channel settings must be the
same on both units).
x
Move transmitter and/or receiver from the immediate vicinity of
the connected A/V devices.
x
These may affect the range.
x
You are (almost) out of range.
x
Changing the position of the transmitter and / or receiver a few
centimetres may rectify the problem.
x
Try again with shorter distances.
x
The images and sound are perfect, but the infrared return
signal does not work.
Check the following:
x
Depending on the local situation the A/V signal can reach further
than the signal of the IR receiver. Try again with shorter
distances.
x
Has the IR emitter been properly connected to the AV
transmitter?
x
Has the IR emitter been properly placed near the IR window of
your A/V device?
I do get images but no sound.
x
The Digital TV Anywhere can send analogue stereo signals, such
as Dolby Surround. Digital systems such as Dolby 5.1 or Dolby
Digital cannot be transmitted.
Do you still have questions?
Check out www.marmitek.com for more information.
DIGITAL TV ANYWHERE
7