Remote Control Functions; Standard Configuration - Clifford 4105X Guia Del Propietario

Remote control functions

The remote buttons are used to send commands to the system. The but-
tons indicated below are for standard configuration.
Standard configuration
Button
The lock function is controlled by pressing
for one second. When held for approximately two seconds, Panic is
activated.
Button
The unlocking function is controlled by pressing
trol for one second. You can also turn Panic off with this button.
Button
Silent Mode ™
pressing
second before locking or unlocking. An optional auxiliary function such
as trunk release may be controlled by pressing and holding
approximately two seconds.
Button
The remote start function of your system is controlled by pressing this
button for one second.
and
Car Finder is controlled by pressing these two buttons.
4
and an optional auxiliary function are controlled by
. Silent Mode works by pressing
Buttons
on the remote control
on the remote con-
for less than one
© 2013 Directed. All rights reserved.
for