User Guide - Infosec XP Pro1000 VA Guía De Usuario

To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
The XP Pro range consists of high performance UPS units with direct connection to the PC
via USB port. Every unit is delivered with a high-level control facility at the UPS power
supply source. The UPS provides balanced output power with its Auto-Regulation and in this
way offers complete protection of your servers and their peripherals, in the event of power
variation, power cuts or micro-power cuts. In the event of power failure due to power cuts,
power surges, or transient over-voltage, the UPS will very rapidly transfer your computer
equipment to an alternative power supply source. This will allow you to make a backup, exit
your program and shut the system down correctly. In normal power supply conditions for
your equipment, the XP Pro will maintain its battery charge in an on-going way to become
completely transparent during all your operations. In other words, this kind of uninterruptible
multifunctional power supply will simplify your tasks. You will be able to check its operating
status quite easily as well as its charge level using the led. This high-technology UPS
guarantees your computer equipment has a proper and reliable power supply. The main
features of the XP Pro range are detailed below.
2 . M A I N C H A R A C T E R I S T I C S
• Microprocessor control guaranteeing high reliability
• Equipped with an automatic output voltage regulator (AVR)
• Built in USB and RS232 communication ports
• It regulates and stabilizes the input voltage
• Compact and light, it will not clutter up your working space
• Multifunctional beeping alarms with led indicator lights
• Anti-lightning-strike, surge, overload and short-circuit protection
• Immediate UPS switch-off in the event of no charge in battery mode
• Phone / modem or network surge protection (RJ45 connectors)
3 . S A F E T Y I N S T R U C T I O N S
The UPS unit uses potentially hazardous voltages. Do not take this equipment apart. It
does not contain accessible components to be repaired by users.
All repairs should be performed by qualified technicians only.
The UPS has its own internal power supply (battery). There is a risk that output sockets
may remain live after the UPS has been disconnected from the mains power supply.
The UPS has been designed to power computers. It should not be used to power
electronic equipment with inductive loads such as motors and fluorescent lights, or with
resistive loads.
Do not connect any non-computer units to the UPS, such as medical equipment for life
support, microwaves, vacuum cleaners etc.
Laser printers should not be connected to the UPS as they consume too much power.
Make sure that the power supply required does not exceed the UPS's capacity. We
recommend using an optimum power load equivalent to half or one third of the nominal
power for longer backup times and longer battery life.
Do not leave any container with liquid on or near the UPS .
INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
2
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 02 06 04 206 12

User guide