Power Storage Console
Grounding Instructions
DANGER
– To reduce the risk of electric shock, serious
injury or death:
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
• Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product - if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
WARNING
– To reduce the risk of electric shock, serious
injury or death:
• Check the condition of the electrical cord and plug monthly. Keep the electrical cord away
from heat sources. Never operate the unit with a damaged electrical cord or plug. Contact
your La-Z-Boy
®
dealer for service.
• Connect this furnishing to a properly grounded outlet only.
• This product must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electrical current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
• This product is for use on a nominal 120-volt circuit and has a grounding plug that looks
like the plug illustrated below. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this product.
This product is equipped with a 3-prong, grounding plug. Plug directly into a properly grounded
outlet, as shown in the illustration below.
3-P
, G
P
RONG
ROUNDING
LUG
Grounding
Pin
8
G
O
B
ROUNDING
UTLET
OX
Grounded
Outlet
Power Storage Console
Operating Instructions
DANGER
– To reduce the risk of electric shock, serious
injury or death:
• Do not remove the cover from the electrical outlets. Do not insert into the outlet anything
other than a securely fitting plug from a properly operating device designed for 110-volt
electricity. If a plug will not fit completely into the outlet, do not force it in and instead unplug
the device. Do not allow liquids near the outlets. In case of spills into the outlets,
immediately unplug the unit and consult an electrician.
1. The power console has a drawer, a sliding table top, two cup holders and two electrical
outlets (F
1).
IGURE
2. Slide the table top back to access the cup holders. Slide the table top forward to cover
the cup holders.
3. Each outlet has an access plate that slides up and down to open and close the outlets. To
use the right side (sitting) outlet, slide the access plate down; and to use the left side (sitting)
outlet, slide the access plate up (F
2). Always keep the outlets closed when not in use.
IGURE
F
1
IGURE
Console
Electrical
Outlet Panel
Sliding
Table Top
Cup
Holders
Drawer
F
2
IGURE
Electrical Outlet Panel
Right Side (Sitting)
Left Side (Sitting)
Outlet Access
Outlet Access
Plate, slide down
Plate, slide up to
to access outlet
access outlet
9