Proper Use; Technical Data; Before Starting The Equipment; Charging The Battery - Goodyear GOD0015 Manual Del Usuario

3. Proper use

The charger is designed for charging
non-maintenance- free or maintenance-free 6
V/12 V starter batteries (lead acid batteries) and
for lead gel/ AGM batteries which are used in
motor vehicles.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.

4. Technical data

Mains voltage: ......................... 220-240 V ~ 50 Hz
Power rating max: ........................................ 35 W
Nominal output voltage: ........... 6 V DC / 12 V DC
Nominal output current at 6 V: ........................2 A
Nominal output current at 12 V: ......................2 A
Battery capacity: .....................................3-60 Ah

5.Before starting the equipment

Please also refer to the instructions in the
Owner's manuals for the car, radio, navigation
system, etc.
Notes on automatic charging
The charger is a microprocessor controlled
automatic charger, i.e. it is suitable in particular
for charging maintenance-free batteries and for
the long-term charging and
maintenance-charging of batteries which are not
in constant use, e.g. For classic cars, recreational
vehicles, lawn tractors
and the like. The integrated microprocessor
enables charging in several steps. The final
charging step, maintenance charging, maintains
the battery capacity at 95–100% and therefore
keeps the battery fully charged at all times. The
charging operation does not need to be
monitored. However, do not leave the battery
unattended if you charge it over an extended
period of time, so that you can disconnect it from
the mains power supply in the event of a fault in
the charger.
5.1 Explanation of the symbols (Fig. 2)
A Battery charging status: 25%
B Battery charging status: 50%
C Battery charging status: 75%
D Battery charging status: 100%
E Charging of a 12 V battery (lead acid battery,
AGM battery and GEL battery) with 2 A charging
current.
F Charging of a 12 V battery (lead acid battery,
AGM battery and GEL battery) in winter mode
with 2 A charging current and an ambient
temperature of – 20°C to +5°C. Danger! Do
not charge any frozen batteries.
G Charging of a 6V battery (lead acid battery,
AGM battery and GEL battery) with 2 A charging
current.
H Clamps are wrongly connected (reverse
polarity)or there is a short-circuit
5.2 Charging settings
Press the Mode button (Fig. 2/Item 1) to set the
charging functions 12 V/2 A (Fig. 2/Item E) and 12
V/2 A Winter Mode (Fig. 2/Item F) (see section
5.1).

5.3 Charging the battery:

• Release or remove the battery stoppers
1 3