12
12C
12D
12B
12A
12D
12C
12 HANDLE INSTALLATION OR REMOVAL
Attach Handle (12A) onto Stem (12B) and secure with Screw (12C). Attach Button (12D).
Reverse procedures to remove.
13
13A
13 FLUSHING
NOTE: Pressure must be approximately equal on both Hot and Cold sides for valve
to function properly.
Turn on Hot and Cold water supply lines allowing water to flow from Shower Outlet (13A)
until all foreign matter has cleared the line.
14
14C
14 SHOWER HEAD INSTALLATION
Thread Shower Head (14A) onto Shower Arm (14B). placing the Washer (14C) in
between.
12B
12A
14B
14A
ENGLISH
15
15A
15B
15B
15A
15 VALVE REMOVAL
Turn off water supplies and relieve pressure before working on your faucet! Be
sure Stems (15A) are in the full OPEN position. Remove Trim (see steps 11 & 12), remove
Valve (15B) and Washer (15C) as shown. Replace parts as necessary.
Inspect and clean the mounting surface thoroughly before replacing.
16
16A
16 SEAT REMOVAL & INSTALLATION
5
Using a
" Square Wrench (16A), remove Internal Seats (16B) from Valve Body (16C)
/
16
as shown. Replace by reversing steps.
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased your faucet.
2.
When replacement parts are not available, please write or call Price Pfister Consumer
Service.
3.
Always turn off water and relieve pressure before working on your faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp cloth to clean and shine.
Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage.
Use of other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar substance are not acceptable for
public areas or Commercial use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call 1–800–PFAUCET
(1–800–732–8238) or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
4
15C
16C
16B