Heath Zenith 6190 Serie Manual De Usario página 5

• Move a jumper on the push button from one location to another. Move
the corresponding jumper on the chime to match the new location in
the push button.
Example: Move jumper at location "5" to location "4" on both the push
button and the chime.
Note: Code positions 1 through 7 must be exactly the same for both
the push button and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7
(see Figure 4).
The range of the wireless chime can vary with location, temperature, and
battery condition.
Chime
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
595-5507-12
* Code Settings 1-7 Must Match
Both Push Button and Chime
Figure 4
Inside Push Button
-5-