Toyota Mr2 Spyder 2000-2005; Toyota Matrix, Pontiac Vibe 2003-2008 - Metra 99-8300 Instrucciones De Instalación

Toyota kit múltiple 2000 y mas
Ocultar thumbs Ver también para 99-8300:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Toyota MR2 Spyder 2000-2005

1. Unsnap the lower trim piece from each
side of the dash console and remove (2)
Phillips screws exposed in each cavity.
2. Remove the upper trim piece from each
side of the console.
3. Remove the climate control knobs and
(2) Phillips screws exposed.
4. Remove the climate control trim bezel.
5. Remove the ashtray and (1) 10mm bolt
exposed.
6. Unclip the ashtray trim bezel and
remove.
7. Unclip the radio trim bezel, remove (4)
Phillips screws securing the unit and
disconnect the wiring.
Continue to Kit Assembly
14
DASH DISASSEMBLY

Toyota Matrix, Pontiac Vibe 2003-2008

1. Unclip the bottom edge of the radio trim
panel then lift up and out to remove.
(Figure A)
2. Remove (4) 10mm bolts securing the
factory radio. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
|
1.800.221.0932
MetraOnline.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido