Fuse Replacement; Battery Charging And Indicator - Chauvet DJ EZpar T6 USB Guía De Referencia Rápida

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of disuse completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of EZpar T6 USB that can be power linked at 120 V or at 230 V, see the User Manual or the
label on the product.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.

Battery Charging and Indicator

The EZpar T6 USB comes with a rechargeable lithium battery for cable-free operation. To charge the battery, simply plug
in the power cord at any time before, during, or after operation. To charge the battery before or after operation with all the
LEDs off, leave the power switch in the Off position. The indicator light for the battery turns red while the battery is
charging. The indicator light turns green when the battery is done charging.
The battery life indicator shows the remaining amount of internal battery life when the menu buttons are inactive.
100%
EZpar T6 USB QRG Rev. 1
QUICK REFERENCE GUIDE
75% 50%
'
25%
EN
3