Using Your Cd Player - Insignia NS-P4113 Guia Del Usuario

Using your CD player

Playing a CD
Caution
Your CD player is designed to play audio CDs. Do not try to
play any other type of discs.
To play a CD:
1 Connect the headphones (included) or optional earphones into the
PHONE jack on your CD player.
2 Press the OPEN button to open the CD compartment door.
3 Insert a disc with the label side facing up.
4 Press down on the CD compartment door until you hear a click.
5 Set the VOLUME control to minimum.
6 Press the
playing the disc. Now Reading appears on the display, then the
total number of audio CD tracks (or the total number of MP3 or
WMA albums and tracks), and total playing time appears on the
display.
After the disc begins to play, the total number of audio CD tracks
(or the total number of MP3 or WMA albums and tracks) and
elapsed time appear on the display.
7 Adjust the volume to a comfortable level. Do not play a disc at a
loud volume level because you may damage your hearing.
8 To pause playback, press the
and audio CD track number (or MP3 or WMA album and track
number) flash on the display. Press the button again to resume
playback.
9 To stop playback, press the
10 To turn off your CD player, press the
Notes
If the CD compartment door opens accidentally during
playback, OPEN appears on the display.
Make sure that the CD has stopped spinning before you
open the CD compartment door. If you open the door,
playback stops.
Your CD player can play 3-inch (8 cm) single CDs without
an adapter.
If you try to play a CD-RW that has not been recorded
correctly, Disc Error appears on the display.
When a disc is playing EPS flashes.
10
NS-P4113 Portable CD/MP3/WMA Player and Digital FM Tuner
button. Your CD player turns on and starts
/
/
button once.
/
www.insignia-products.com
button. The elapsed time
button twice.
/