Konig Computer CMP-WNPCEXCA30 Manual De Uso página 4

Connect to Wireless Access Point
Using Confi guration Utility to Connect to Wireless Access Point
1. After installation is complete, wireless
confi guration utility will be shown as an icon
at the lower-right corner of your windows
desktop. Please click the icon by right mouse
key, and select „Launch Confi g Utilities".
2. Confi guration utility will scan for wireless
access points automatically, and all found
access points will be displayed. Please
select an access point you wish to connect,
and click „Connect".
If the wireless access point you want to connect
does not show here, please click „Rescan".
3. If the wireless access point uses encryption,
you have to input WEP passphrase or WPA
preshared key. Please ask the owner of the
wireless access point you want to connect,
and input the correct passphrase / preshared
key here, then click „OK". If the value you
inputted here is wrong, you will not be able
to connect to wireless access point.
Authentication type is selected automati-
cally, please don't change it.
4