Publicidad
Idiomas disponibles
Idiomas disponibles
4. ADJUSTING HEADGEAR
1. Top head band to move the Head Band in the direction of arrow (as picture) to adjust the depth of
headband. According to user's head shape adjust to a suitable position.
2. Distance of Harness from filter lens to adjust the distance from the welder's eyes to filter lens (left-right
Symmetrical adjustment).
3. Back of headband to adjust the size of headband (loose or tighten).
4. Incline angle adjustment to adjust the incline angle of helmet relative to the welder's face, and adjust the
height of welder's eyes relative to filter lens.
-
This model is designed & equipped with a special turnover (up & down) headband mechanism. When
welder turns over the helmet to welder's head top, the headband mechanism makes helmet's gravity
center to be lower, and be coincided with the center of welder's head. The design of welding helmet
greatly lowers the fatigue of welder's head (& neck) and make welder feel more comfortable than before
while at working
-
Headband has been set unevenly and there is an uneven distance from the eyes to the filter's lens (Reset
headband to reduce the difference to filter.
5. SPARE PARTS
Item 1: Helmet shell
Item 3: complete headband
Item 5: front cover lens
GALAXY
Item 2: Auto darkening filter
Item 4: Headband knob
Item 6: Inside cover lens
7
Publicidad
