Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Power supply and symmetric of ± 24 V. Specially designed to simultaneously power two stages E-20
It incorporates adjustable output for preamplificer , indicator Leds and protection fuses.
Install a fuse and a switch to the protection and safety, as reflected in the CE standard.
Alimentation symétrique ± 24 V. Spécialement conçu pour fonctionner simultanément deux étapes E-20
Comprend une sortie réglable pour alimenter preamplificateur , Leds et des fusibles de protection
Installez un fusible et un interrupteur pour la protection et la sécurité, comme en témoigne la norme CE
Fuente de alimentación simétrica de ± 24 V. Especialmente ideada para alimentar simultáneamente dos etapas E-20.
Incorpora salida ajustable para alimentación de previos, leds indicadores y fusibles de protección.
Instale un fusible y un interruptor para la protección y seguridad, tal como refleja la norma CE.
SYMMETRICAL POWER SUPPLY
SOURCE D'ALIMENTATION SYMETRIQUE
FUENTE de ALIMENTACION SIMETRICA
Input Voltage : 230. V. A.C.
Output Voltage : ± 24 V. D.C.
Maximum Output Intensity : 1+1 A.
Output Voltage for previous : 18 V.(adjustable between17 and 22 V.)
Maximum Output Intensity for previous : 150 mA.
Protection against Short-circui : Fuse.
Transformator Sizes : 75 x 56 x 63 mm
Circuit Sizes : 88 x 71x x 38 mm
www.cebek.com
-
sat@fadisel.com
± 24 V. DC
FS-20
TECHNICAL CHARACTERISTICS

Publicidad

loading

Resumen de contenidos para CEBEK FS-20

  • Página 1 SYMMETRICAL POWER SUPPLY SOURCE D’ALIMENTATION SYMETRIQUE FUENTE de ALIMENTACION SIMETRICA ± 24 V. DC FS-20 TECHNICAL CHARACTERISTICS Input Voltage : 230. V. A.C. Output Voltage : ± 24 V. D.C. Maximum Output Intensity : 1+1 A. Output Voltage for previous : 18 V.(adjustable between17 and 22 V.) Maximum Output Intensity for previous : 150 mA.
  • Página 2 Once this operation has been carried out, activate the power switch. The leds of the circuit will light up and the source will provide voltage to the output. EXIT FOR PREVIOUS. It incorporates an output to feed the previous Cebek. Using the potentiometer of the circuit, it allows adjusting the supply voltage of the previous ones.