Denios FKH Manual De Instrucciones página 4

English
1. Fundamental safety instructions
Anyone involved with the operation and repair of the drum trolley, should read and be aware of the
contents of the operating manual.
The drum trolley should only be used by trained personnel. Manoeuvre the trolley over uneven
-
ground very carefully!
Do not push the trolley down slopes!
-
Push the supports under the drum before tipping the drum trolley!
-
Safety instructions for ex-model
Chemical and mechanical influences as well as the accumulation of obstructive substances can alter electrical
conductivity to such an extent that the permitted levels laid out in standards are exceeded. Dust, dirt, paint,
acids, leaches, overloading and impact loads, in particular, may impede or completely prevent electrical or
electrostatic energy from being relayed to the ground. For this reason, you must keep the device completely
clean, especially its wheels and castors, and you must not apply an extra layer of paint.
Because of the abundance of influences unknown to us in the use of our products our guarantee with respect
to the electrical conductivity relates exclusively to the compliance with the permitted values of the wheels in
new condition on delivery laid down in the standards.
The constant observation of technical safety regulations such as e.g. compliance with the values with respect
to electrical conductivity in use is exclusively in the area of responsibility of the user.
Only use DENIOS replacement parts when replacing components. Replacing with unsuitable parts will mean
the device is no longer ATEX-compatible.
2. Technical details
The drum trolley is manufactured from galvanized steel with rubber or pneumatic tyres.
3. Specifications
Safe working load: 300 kg
4. Operation
Operation
•
Position drum trolley in front of the drum to be transported.
•
Incline drum trolley towards drum.
•
Secure safety hooks on drum rim
•
Slowly remove drum trolley and support with the foot, the prongs must grip under the drum.
•
Ensure that the prongs are located under the drum.
•
Firmly remove drum trolley (the heavier the drum, the more effort is required)
Filling
•
For filling pick up the drum with the stopper towards the drum trolley (see above)
•
Lower drum backwards with drum trolley until it lies on the supports
Use and intended purpose
The drum cart is used for the safe internal movement of 200 litre drums and as a dispensing station for them.
6. Maintenance and servicing
Tip product, check the rollers for ease of movement and if necessary grease with commercial grease.
Regularly check the air pressure for drum trolleys with pneumatic tyres
Check at regular intervals for any damage. In case of damage the product must not be further used!
Fasskarre FKH
115229, 115240, 164355, 116349,
180860, 180861
Seite 4 von 10 Seiten Ausgabe 05/2010