Function And Location Of The Controls; Scan Mode - Midland ALAN 78 PLUS MULTI Manual De Instrucciones

FUNCTION AND LOCATION OF THE CONTROLS

1
78 PLUS MULTI
LOCK
EMG
CHANNEL
3
1. Channel selector
2. Multifunction backlighted display. It shows:
A
B
A. Channel selected number
B. The received signal strength and the power of the transmitting signal
C. AM/FM mode
D. RX/TX:TX=transmit mode; RX=receive mode
E. SCAN mode
F. EMG mode
G. Frequency band selected.
H. LOW: displayed when the radio transmits in low power (this mode is pos-
sible with some frequency bands only – see the Frequency band chart).
I. LOCK: microphone (UP/DOWN buttons) lock enabled.
3. "EMG" button: Emergency channel. By pressing it, you will be automatically
positioned on CH 9 (emergency channel). The display will show "EMG". It will
not be possibile to change accidentally the channel.
4. 5. "Q.UP/Q.DOWN" buttons: To skip 10 channels UP (Q. UP) or 10 channels
DOWN (Q.DOWN).
6. "AM/FM"(LCR) button: To select AM or FM mode. If you switch on the unit
and push "AM/FM"(LCR) and "SCAN" at the same time, you will select the
2
FM
SCAN
CH
SQUELCH
AM LOW
SIG
+30 RX
9
5
3
1
TX
0.5
1 2 3 4 PWR
EMG
Q.UP Q.DOWN AM/FM SCAN
LCR
4 5 6 7
C H
FM
CH SCAN
AM LOW
+30
9
5
3
1
0.5
1 2 3 4
LOCK EMG
I F
2
8 9 10
ON/OFF VOL
ON/OFF MIC
E
G
SIG
RX
D
TX
PWR