WireLogic SMART SURGE 10 Guia Del Usuario página 5

ADDITIONAL PROTECTION
TELEPHONE (RJ11) PROTECTION
Provides protection against surges on phone line.
NETWORK JACK (RJ45) PROTECTION
Provides protection against surges on network line.
COAXIAL CONNECTOR PROTECTION
Provides protection against surges on cable, satellite, and antenna lines.
ADDITIONAL POWER
USB Charging Ports
Two USB charging ports provide 2.1A power total, and can be used for
charging a smartphone or other mobile device.
SMART SURGE INDICATOR LIGHTS
PROTECTED indicator light
This LED glows to indicate that the surge protection is active and
protecting equipment from power surges.
GROUNDED indicator light
This LED glows to indicate that the surge protector is plugged into a
properly grounded outlet.
MASTER CONTROL OUTLET indicator light
This LED glows to indicate that the MASTER CONTROL outlet is on.
ENERGY SAVER ON indicator light
In Energy Saver On mode, this LED glows only when the device connected
to the MASTER CONTROL outlet is turned on. In Surge Protection Only
mode, this LED will always glow to indicate that the ENERGY SAVER
outlets are always powered on.
ALWAYS ON indicator light
This LED glows to indicate that the ALWAYS ON outlets are on.
CIRCUIT BREAKER RESET
In the event that an overload condition has tripped the circuit breaker, the
RESET button allows the user to reset the circuit breaker. Before pushing
the RESET button, disconnect all equipment from the surge protector.
For warranty information, see back for details.