Brief Description/General Information - Heidolph REAX top Instrucciones De Empleo

Ocultar thumbs Ver también para REAX top:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

BRIEF DESCRIPTION/GENERAL INFORMATION

 REAX top and REAX control are the successor models to the well-known, tried and
tested test tube shaker REAX 2000.
REAX top is equipped with speed control.
REAX control is equipped with speed control for a constant speed even in the low
range.
 On both models, shaking is actuated by the pressure of the test tube on the tray.
What is new is the practical switchover function from periodic to continuous operation.
Unpack the appliance and parts with care.
Compare the contents with the packing
list. Check for damage and report any
defects or deviations from the packing list
to the supplier without delay.
Read the operating instructions carefully
and in full and ensure that everyone who
operates the appliance has read the in-
structions carefully before use.
Keep the operating instructions in a place
which is accessible to everyone.
This appliance comes fitted with a Euro
plug (DIN 49441 CEE 7/VII 10/16 A 250
V) or, for North America, with a US
standard plug (NEMA Pub.No.WDI-1961
ASA C 73.1-1961 page 8 15 A 125 V).
BRIEF DESCRIPTION
GENERAL INFORMATION
 If the appliance is to be connected up
to different grid, an approved adapter
must be used or the plug supplied
replaced by a qualified electrician
with a 3-pin plug approved for the
grid in question
 The appliance is earthed upon deliv-
ery. If the original plug is replaced,
make sure the appliance's protective
conductor is connected to the new
plug.
EN
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Reax control

Tabla de contenido