Hama Slim-Traveller Manual De Instrucciones página 26

If a fault occurs, first check the points listed below before taking
the set for repair.
If you are unable to remedy a problem by following these hints,
consult your dealer or service center.
do not open the set as there is a risk of electric shock.
Under no circumstances should you try to repair the set yourself,
as this will invalidate the warranty.
Problem with the electrical supply of the picture screen.
Check that the plug of the power adapter is connected correctly
and completely. Also check that the power supply unit is
connected to the power supply and supplied with electricity.
Safety violation in the internal software of the digital
picture frame.
This may be due to the fi le format used. There are some
confi gurations that cause the software of the digital picture frame
to crash. However, the cause does not lie with the technology/
software of the digital picture screen, but with the fi le convention
of the fi le to be displayed or played. If the digital picture frame
can not be restored using the EXIT button in the function selection
menu or can not be switched off, disconnect the picture frame
from the mains supply. Reconnect it and switch it on again after
a few seconds.
the data rate/quality or resolution is too low
The quality loss of images is caused by compression and
insuffi cient resolution. If it is possible to have a higher resolution
for the data, use this when displaying or playing fi les.
25