Installation And Use - Guardian Edge 11 Web SRL Serie Manual De Instrucciones

Installation and Use

Guardian Fall Protection Edge Series 11' Web SRLs
MUST NEVER be used in Leading Edge (LE) applications.
No free fall is allowed.
ALWAYS avoid lifeline contact with sharp or abrasive edges and surfaces.
1. All components of the personal fall arrest system must be selected and deemed compatible
with applicable SRL by a Competent Person.
2. Ensure structure to which SRL is to be attached, and on which work is to be performed, is free
of all hazards, including, but not limited to, debris, rot, rust, sharp or abrasive edges and
surfaces, and hazardous materials.
3. Edge Series SRLs may be used in either mobile or stationary applications. SRL must always
be positioned at or above harness dorsal D-ring AND at or below anchor point.
4. For stationary applications, attach Edge Series SRL carabiner to selected anchorage connector,
and attach snap hook to applicable harness D-ring.
5. For mobile applications, attach SRL carabiner to harness Dorsal D-ring, and attach snap hook
to selected anchorage connector.
*If using SRL with rebar hook configuration, SRL carabiner must ALWAYS be attached to harness
dorsal D-ring, and rebar hook must ALWAYS be connected to compatible structural rebar.
6. Ensure 100% tie-off will be maintained at all times, which may require the use of a back-up
or supplementary fall protection system.
11