Pentair FRESHPOINT EASY FLOW Guia Del Usuario página 5

FILTER REPLACEMENT INSTRUCTIONS
1.
Shut off the cold water to your faucet by turning cold-water
valve, under the sink, clockwise.
2.
Turn on cold water faucet to release pressure and to drain
water from hose.
3.
Press and hold Filter Release Button while holding firmly on
the base. Pull up on the exhausted filter to remove.
4.
Insert the new filter into base of the FreshPoint Easy Flow
Water Filtration System. An audible click ensures proper
sealing of the filter.
5.
Open water shutoff valve by turning counter-clockwise.
6.
Allow water to flow with faucet open completely
for fifteen (15) minutes to flush the filter.
NOTE: A drinking water filter may contain carbon fines
(very fine black particles). If carbon fines appear in
the water, continue flushing until none are present.
NOTE: Initially, filtered water may appear cloudy.
If cloudiness in glass of water rises to the top, the cause
is likely due to air in the water. The air (and cloudiness)
will disappear within a few weeks after installation.
7.
Press and hold small Filter Life Indicator Button for five
(5) seconds. A blue light on the Filter Life Indicator will
flash four (4) times to confirm timer has started.
2
1
4
7
6
Pentair FreshPoint Easy Flow User' s Guide
3
5
• 5