Monitoring Function; Vox Function (Voice Activated Recording) - Dictaphone Professional Serie Manual De Usuario

Monitoring Function.

During recording, insert the earphone into the
Earphone Jack µ to monitor the recording
contents. The monitoring level can be adjusted by
the Volume Control Knob
VOX Function (Voice Activated
Recording)
1. Set the VOX/F.Play switch ² to the VOX
position.
2. Set the tape speed (2.4cm/s or 1.2cm/s) with
the Tape Speed switch ´.
3. Set the voice activated recording level by
adjusting the Volume Control Knob
volume levels from 8 to 10, the recording
starts even with soft sounds, while at volume
levels from 5 to 7, the recording starts with
louder sounds. At the lowest setting, recording
will not start at all.
4. Slide the Mode Selector switch
Record position. Recording begins, and the
red LED indicator ¸ will light. When the tape
is not moving, the red LED will blink. In VOX
mode, the Model 3255 will continue recording
for about 3 seconds after any sound finishes.
6
.
. At
to the