Wattio SIREN Manual página 18

5º Place the Siren on base and fixed to the wall.
Chose a discrete zone so the SIREN is not
detected by the intruder.
Notice! Do not place anything in front of the
speaker to avoid acoustic signal minimization.
It might be necessary to reset the sensor and switch it on
again in case it does not connect correctly to the system.
DEVICE REGISTRATION:
Once finished the installation, the device
must be registered.
To do so, enter myhome.wattio.com and
log in.
The Wizard will guide the set up and the
installation will be finished
To reset to factory setting keep pressing button B and the
indicator will flash green seven times and finally red one
more time in case it resets correctly.
It is recommended to remove the batteries when it is not
intended to be used for a long period of time.