Mounting And Removing Flat Panel Display - peerless-AV EPT650 Instalación Y Montaje

Mounting and Removing Flat Panel Display

WARNING
• Always use an assistant or mechanical lifting equipment
to safely lift and position the fl at panel display.
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
• Be careful not to pinch fi ngers when pushing display from
the bottom.
3
Mounting Display: Slowly hook tilt brackets
(B,C) onto wall plate (A) and swing display down
as shown in fi g. 3.1. Tilt bracket hooks must fully
engage wall plate as shown in detail 1. Using
the security allen wrench (F), turn safety/security
screws on tilt brackets (B,C) clockwise till screw
tip securely contacts wall plate as shown in cross
section.
Optional Security: Place a padlock with a shackle
dia. of 1/4" (6.35mm) (not supplied) through both
holes in tilt bracket (B or C) for added security.
Display Adjustment: Display can be adjusted
horizontally by loosening safety/security screws on
tilt brackets (B,C) three full turns. Adjust display as
shown in fi gure 3.2. Tighten safety/security screws
on tilt brackets till screw tip securely contacts wall
plate as shown in cross section.
Removing Display: To remove display from mount,
loosen safety screws, swing display away from
mount, and lift display off of mount.
Adjusting the Tilt Angle of the Flat Panel
Display
4
NOTE: Choosing and setting tilt position may be
easier before placing display onto wall mount.
INCRELOK™: The display can be locked into a
pre-set tilt position of -5°, 0°, 5°,
locator hole to fi nd tilt position hole and tilt display
to align holes. Tighten IncreLok™ tilt locking
screws on both tilt brackets to lock tilt as shown in
detail 2.
SAFETY/
SECURITY
SCREW
10° or 15°. Use
TILT
POSITION
HOLES
8 of 26
All other brand and product names are trademarks or registered trademarks of their respective owners.
B,C
A
DETAIL 1
A
CROSS SECTION
IncreLok™
TILT
LOCKING
SCREW
DETAIL 2
fi g 4.1
ISSUED: 01-05-11 SHEET #: 203-9014-3 06-01-12
© 2012, Peerless Industries, Inc. All rights reserved.
B,C
fi g 3.1
fi g 3.2
LOCATOR
HOLE
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerless-av.com