Temperature Control - Continental CE-IR941 Manual De Usuario

USE
Remove the protection film from the steam plate before first use.
You can use your steam iron with usual tap -water. Should the water harder than 17C , destilled or demineralized water has to be
o
used to increase the steam iron's life span.
FILL IN WATER TANK FOR STEAM IRONING
Unplug the appliance an screw the temperature control (7) to position "0" (minimal).
Fill so much water into the tank until the water-level is visible with horizontal by hold tank in the middle of the transparent
window.
Now connect the steam iron with a correctly installed power point

TEMPERATURE CONTROL

Put the steam iron upright and select the desired temperature with the temperature control (7).
By doing so pay attention to the care symbols on the textiles:
* Chemical fibred /synthetic
** Nature fibred/silk/wool
*** Nature fibred/cotton/linen
Assort your steam laundry to texture and corresponding steam temperature, iron the sensitive materials with the low steam
temperature first as steam iron gets essentially faster hot than gets cold.
The pilot light (9) indicates that the steam iron gets hot. After the pilot light is off , the selected temperature has been reached and
you can start ironing.
FUNCTIONS
Water Spray
To moist the steam laundry press the button "water spray"
Dry/Steam
You can fix the steam intensity directly by urning turning the
steam function "0"=steam dry =maximum steam outflow
Burst of steam
To reach a burst of steam, press the button "short burst of steam".
Attention: Only, use the steam push button when the steam iron has reached the steam or
maximum temperature.
Do not press this button more than 3 times at once.