Safety Notes - Chauvet Professional Q-Spot 560 LED Guia De Inicio Rapido

Q-Spot™ 560 LED QRG
About this
Guide
Disclaimer

Safety Notes

Contact
What Is
Included
AC Power
AC Plug
Fuse
Replacement
The Q-Spot™ 560 LED Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from
details.
The information and specifications contained in this QRG are subject to
change without notice.
•
DO NOT open this product. It contains no user-serviceable parts.
•
DO NOT look at the light source when the product is on.
•
CAUTION! This product's housing is hot when lights are operating.
•
Mount this product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
•
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
•
DO NOT connect this product to a dimmer or rheostat.
•
ONLY connect this product to a grounded and protected circuit.
•
ONLY use the hanging/mounting bracket or the handles to carry this
product. DO NOT carry by the moving head.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
Outside the U.S., UK, or Ireland, contact your dealer to request support or
return a product. Visit
•
Q-Spot™ 560 LED
•
Power Input Cord
•
2 Omega Brackets (for mounting)
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from the power outlet.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder
and pry the safety cap out of the housing.
3. Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating (T 5 A, 250 V).
4. Insert the fuse holder back in place and reconnect power.
www.chauvetlighting.com
www.chauvetlighting.com
•
•
•
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow
2
for contact information.
Safety Cable
Warranty Card
Quick Reference Guide
Brown
Blue
Green/Yellow
EN
for more
Screw Color
Yellow/Brass
Silver
Green