Battery Charging; Turn It On & Off - Motorola MOTOKRZR K1 Guia Del Usuario

3

battery charging

New batteries are not fully charged.
Uncover the
phone's
charger plug
connection (as
shown). Then,
plug the
battery charger
into your phone and an electrical outlet. Your
phone might take several seconds to start
charging the battery. When finished, your
display shows Charge Complete.
12 essentials
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
You can charge your battery by
connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
turn it on & off
Caution: Some phones ask for your SIM card
PIN code when you turn them on. If you enter
an incorrect PIN code three times before the
correct code, your SIM card is disabled, and
your display shows SIM Blocked. Contact your
service provider.