Publicidad
Idiomas disponibles
Idiomas disponibles
.
The initial 15 minutes of use may produce a slight smell and smoke. This
is normal and harmless and it comes from the burning of the protective
substance applied to the heating elements during manufacturing. It is
recommended to run the unit for 15 minutes on the LOW setting to
eliminate the odor and smoke before using it for the first time.
.
1.
Before plugging in your new burner, check to see that the electric
circuit is not overloaded with other appliances. This unit should always
be operated on a separate 120Volt AC
outlet.
2.
Be certain that your unit is resting on a
leveled flat, heat resistant countertop.
Also, avoid using pans that are unstable
and that can easily tip over.
3.
Place pan on heating element.
4.
Turn the temperature control knob to the
desired heat setting. The power indicator
light of the switch will glow indicating
the heating element is turned on and
heating will begin immediately.
Note: THE METAL SURFACE WILL
BECOME VERY HOT, SO PLEASE DO
NOT TOUCH WHILE IN USE.
5.
When cooking is complete, turn temperature control knob back to "OFF"
position.
6.
If the burner is not to be in use for a long period of time, it is HIGHLY
recommended to unplug the unit from the outlet. This helps to prevent
any accidental burns or injury.
....
Wipe off the base and heating element with a
damp cloth. DO NOT IMMERSE THE BASE IN
WATER OR ANY OTHER LIQUID.
Any other servicing not recommended by the
manufacturer may cause hazards and should
be performed by an authorized
representative.
BEFORE FIRST USE (CONT.)
HOW TO USE
Care and Maintenance
3
Publicidad
