Set Up The Dual-Band Wireless A+Gpci Adapter - Linksys WMP55AG Guía De Instalación Rápida

Set up the Dual-Band Wireless A+G
1
PCI Adapter
IMPORTANT: You must run the
Setup Wizard before inserting the
Adapter into your desktop PC.
A
Insert the Setup Wizard CD-ROM
into your CD-ROM drive. The Setup
Wizard should run automatically,
and the Welcome screen should
appear. If it does not, click the
Start button and choose Run. In
the field that appears, enter
D:\setup.exe (if "D" is the letter of
your CD-ROM drive).
B
To install the Adapter, click the
Install button on the Welcome
screen.
C
After reading the License
Agreement, click Next.
D
Now, choose a network type.
Click the 5GHz or 2.4GHz radio
button if you will connect to
802.11a, 802.11g and/or 802.11b
networks. Click the 5GHz only
radio button if you will connect
only to 802.11a networks. Click
the 2.4GHz only radio button if
you will connect only to 802.11g
and/or 802.11b networks. Then,
click Next.
E
Choose a wireless network mode.
Click the Infrastructure Mode
radio button if you want your
wireless computers to network with
computers on your wired network
using a wireless access point.
Click the Ad-Hoc Mode radio
button if you want multiple wireless
computers to network directly with
each other.
2
B
C
D
E