Technical Characteristics - Fanox EMM-6 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

MEASURE, ACCURACY

Effective value of phase voltage and phase to phase voltage of the system (average)

Voltage

Measuring range: 20 – 500 Vrms phase to phase (290 Vrms phase to neutral)

Accuracy: ±0.5%

Effective value of current and system value average

Current

Measuring range: 0.02 – 5 Arms

Accuracy: ±0.5%

Displaying: 0.02 – 9.99 kA

Phase L1 frequency

Frequency

Measuring range: 40 – 500 Hz

Accuracy: ±0.5% ±1 digit

Phase and three phase active power system, phase and three phase reactive power, phase and three

Power

phase apparent power (addition)

Measuring range: 0.01 – 9990 kW, 0.01 – 9990 kVAr, 0.01 – 9990 kVA

Accuracy: ±1%

Phase and three phase power factor system (average)

Power Factor

Measuring range: -0.1 +0.1

Accuracy: ±1%

Temperature

Temperature sensed by internal sensor

Measuring range: 0 – 70ºC

Accuracy: ±2ºC (time delay to measure 15 minutes)

Active and reactive energy in the three phase system

Energy-meter

Measuring range: 0 – 99999999,9 kWh (kVArh)

Class 2 (IEC 1036)

POWER SUPPLY, INPUTS

Auxiliary supply

100-125 / 220-240 / 380-415 V (50-60 Hz)

Selfconsumption: 3 VA

Voltage input

From 20 to 500 V phase to phase

Continuous overload: +20%

Input impedance: 1MΩ

Connection on single phase, 3 or 4 wires system

Current input

From 0.02 to 5 A

Continuous overload: 30%

From external CT with secondary /5A, primary programmable from 5 to 10.000A (self consumption <0.5VA)

GENERAL SPECIFICATIONS

Display

4 displays with red LED composed by 3 digits of 8 segments

3 buttons to select measuring and programming of CT transformation ratio

Degree of protection: IP52 front, IP20 enclosure and terminals

Mechanicals

Weight: 0.5 kg

Maximum terminal section: 2.5 mm

Operational temperature: -10 +60ºC

Environment

Humidity: <90%

Stocking temperature –25 +80ºC

Insulation: 3 kV (1 min.)

Normatives and

CEI EN 50081-2, CEI EN 50082-1

Markings

CEI EN 61010-1

For each application and functional problems not treated in the present manual, it's possible to contact our technical assistance service.

The manufacturer declines any responsibility for eventual injury or damage to persons or things as result caused by misuse or improper use of

the instrument.

PAE Asuaran – Edif. Artxanda, 23

Tel. (94) 4711409 Inter. 34-94-4711409 - Fax. (94) 4710592 Inter. 34-94-4710592