FIRST USE
1.
Open the box and unpack the product.
2.
Make sure there is enough space to pull all parts before starting assembly
3.
Necessary to remove the wáter tank to fill it.
4.
Put clean wáter until MAX signal. Replace the wáter tank at its place and dry any pie-
ce of wáter. If you have any difficulty placing the tank in the correct positionm, please
read "cleaning and maintenance"
5.
To use ice cubes, open the tank and insert them inside the wáter tank
6.
Plug in the unit
NOTE
1. Do not put ice pack or ice cube into the water tank when. It is full as the water may
overflow
2. The ice pack should be frozen 2-3 hours before use
3. The ice pack is sealed in factory, please do not try to open it
OPERATING MODES
ON / OFF Button
a. Press the ON/OFF button. The indicator light comes on and the unit will start
to operate.
b. Press the ON/OFF button again to turn off the unit.
14