Kobalt KWDV 0124B-03 Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
g. To install the filter, slide it over the float cage. Align the filter tabs with the motor housing
notches and turn it 1/2 inch clockwise to lock it in place.
h. Replace the motor housing and secure both tank latches.
NOTICE: Keep filters clean. Efficiency of the vacuum is largely dependent on the filters. Dirty
filters will reduce the air flow and the efficiency of the filtration system. Do NOT machine wash
or dry. Clean the filter with a gentle flow of water. Not squeeze or wring the filter, which will
damage the filter.
3. Pickup/Blower
The vacuum can be used for debris pickup or as a
blower, depending on the port used.
To attach hose for debris pickup
a. Insert the large end of hose (I) into the intake
port (G) of the motor housing, lining up the tabs
on the hose with the notches in the port.
b. Twist the base of the hose to secure it and form
a tight fit.
To attach as blower
a. Insert the large end of hose into the blower port
of the motor housing
tabs on the hose with the notches in the port.
b. Twist the base of the hose to secure it and form
a tight fit.
c. Attach one of the accessories to the other end
of the hose. Twist to form a tight fit.
Use 1-1/4 inch opening accessories.
(H), lining up the
10
3a
I
3b