dirna Bergstrom TRP SLIMCOOL Manual De Instrucciones página 21

SLIMCOOL
• Repair any blockage in the centrifugal blower or condenser fan; if the error persists,
replace the centrifugal blower or the condenser fan (remove the unit's outside cover
to access the centrifugal blower or the condenser fan; for the blower, also remove
the evaporator cover).
• Replace the 7.5A fuse. Take down the control panel access cover in the interior air
distribution panel in order to access the condenser fan or centrifugal blower fuses.
!
(If the error persists, contact the Authorised Technical Service).
• Replace the defective compressor or compressors.
• Connect the compressor module correctly or replace it (take down the unit's outside
cover to access the modules and the compressors). Note: the references of each
of the modules are different; check that it is replaced using the correct reference.
!
(If the error persists, contact the Authorised Technical Service).
• Check compressor terminal connections or possible cuts in cables.
• Connect cable clamps in the electronic control.
• Check that the references of each of the modules are different.
!
(If the error persists, contact the Authorised Technical Service).
Solution
21
EN
®