Gree GDN20AQ-E4EBA1A El Manual Del Propietario página 11

6
Continuous button
Press this button to set continuous dehumidify.
Note:
When selecting CO mode, drain hose has to be installed. Otherwise,
unit will stop when water bucket is full.
7
FILTER Button
been operating for 250 hours, Filter Cleaning Indicator will be lit up to remind
Other Instructions
1. Alarm Warning
If bucket is full or not locked into place for over 3min, buzzer will go off for 10s
to remind you to empty bucket or put it back into the correct place.
2. Auto Stop
When bucket is full, removed or not placed correctly or the humidity is 5%lower
than the set humidity, unit will automatically stop.
3. Memory Function
If power is lost, all of the control settings are remembered. So when power is
restored, the unit will start back up in the settings it was in when power was
lost.
4. Bucket full light
This indicates that bucket is full or removed or not placed correctly.
5. Clean the Filter On indicator light
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
7