Albrecht Audio MAX-twist Manual De Instrucciones página 9

Pairing MAX-twist with mobiles (Bluetooth enabled) and Tablets.
1- Please keep the speaker and mobile within 1 meter
2- Turn on MAX-twist, blue & red LED blinks quickly, the unit is standby for pairing.
3- Start the Bluetooth function of mobile and search the Bluetooth devices, after searched,
select "MAX-twist" in the Bluetooth device list.
4- If required, enter password or PIN N0: "0000", and press the key of "Yes" or "Confirm".
Some mobiles don't need password; it depends on Bluetooth setting and version.
5- After successful pairing, select "MAX-twist" in the Bluetooth device list, and press
"connect"
6- LED turns to solid blue indicating MAX-twist is paired with devices via Bluetooth.
Note:
1: If the pairing is not successful, please turn off speaker firstly, and then re-pair again.
2: After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted because of new pairing, no need to pair when use next time. If you want to
pair the speaker with other devices, please turn off Bluetooth function of existing source device,
and pair MAX-twist with the new device according to steps 1-6 mentioned above.
Paring MAX-twist with iPhone, iPad
1- Please keep MAX-twist and iPhone (iPad) in the range of 1 meter when pairing
2- Turn on MAX-twist, blue & red LED blinks quickly, the unit is standby for pairing.
3- In iPhone (iPad) General > Bluetooth, tap on Bluetooth function, search the Bluetooth
devices and MAX-twist will be identified quickly.
4- Select MAX-twist ST to complete pairing.
5- LED turns to solid blue indicating MAX-twist is paired with iPhone (iPad) via Bluetooth.
Paring MAX-twist with Bluetooth enabled PC or notebook
1- Please keep MAX-twist and PC in the range of 1 meter when pairing
2- Turn on MAX-twist, blue & red LED blinks quickly, the unit is standby for pairing.
3- Activate Bluetooth connectivity on your PC and begin SEARCH NEW DEVICE function.
4- After a short scanning period, PC will indicate that your MAX-twist speaker has been
discovered and is ready for connecting/pairing.
5- If you are requested to enter a pin-code, use the code "0000"
6- Click to pair MAX-twist and PC.
7- LED turns to solid blue indicating MAX-twist is paired with devices via Bluetooth.
Pairing MAX-twist with Mac OS X 10 or above
1- Please keep MAX-twist and Mac in the range of 1 meter when pairing
2- Turn on MAX-twist, blue & red LED blinks quickly, the unit is standby for pairing.
3- Pair it with Mac – choose setup Bluetooth Device from the Bluetooth status menu in the
menu bar, and follow the onscreen instructions to pair with the speaker. If the Bluetooth
status menu is not available, open Bluetooth Preference and select the "Show Bluetooth
status in the menu bar" checkbox. As per of the pairing process, you may need to enter a
passkey (0000)
4- Open System Preferences and click Sound
5- Click Output and select the Bluetooth speaker
6- Click Input and select your speaker. Adjust the Input and Output volume.
7- LED turns to solid blue indicating MAX-twist is paired with devices via Bluetooth.