Intellinet 524728 Guía De Instalación Rápida página 2

Idiomas disponibles

Wireless N Access Point • Quick Install Guide

Thank you for purchasing this Intellinet Network Solutions

Model 525404 (150N); 524728 (300N); or 524735 (300N PoE).

This quick install guide presents basic installation steps. For operation details and

specifications, refer to the user manual at intellinet-network.com.

CONNECTIONS

1. Use the included Ethernet cable to connect your router or switch/hub to the LAN

port on the back panel of the access point.

2. Attach the antenna(s). NOTE: Model 524704 features only one antenna.

3. Connect the A/C power adapter to a wall socket, then connect it

to the power socket of the access point. NOTE: Model 524735 allows

you to power the access point through the LAN port when connected

to an IEEE802.3af PoE-compliant power source.

4. Check all LEDs on the front panel. The PWR and LAN LEDs should both be on to

indicate the access point is powered and connected properly. The WLAN LED will

light when WPS mode is enabled (refer to the user manual); both the LAN and WLAN

LEDs will blink data is transmitted.

OPERATION

1. Enter http://192.168.2.1 on your Web browser to display a login window for the Web

management interface, where all functions

and settings for the access point are

configured.

2. Enter "admin" for username and "1234" for

password, then click "OK" to display the

home page of the interface. Refer to the user

manual for further instructions.

ENGLISH

Wireless N Access Point:

™

User name:

Password:

English

524735