Remote Panic Operation - Prestige Platinum APS-250 El Manual Del Propietario

REMOTE PANIC OPERATION

The ARM / DISARM button on your keychain transmitter also functions as a panic switch for
use in emergency situations. To use remote panic,
1. Press and hold the ARM / DISARM button on the keychain transmitter for 3 or
more seconds. The alarm will immediately sound.
2. To stop the alarm, press and hold the ARM / DISARM button on the transmitter
again for 3 seconds. If the button is not pressed, the alarm will automatically stop
after 30 seconds.
NOTE : All normal transmitter functions operate in the panic mode.
ADDITIONAL REMOTE FUNCTION ( CHANNEL 2 )
This security system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;
 Remote Trunk Release
 Remote Car Starter
 Remote Window Closure
 Remote Garage Door Interface
To activate the optional accessory, press and hold Button 2 on the keychain transmitter for 4
seconds.
Page 6
128-4629B
6 of 21