Troubleshooting - Magic Chef MCSRC03ST Manual De Usuario

TROUBLESHOOTING

Probelm
Indicator lights not on Unit is not plugged in
Unit Not heating
Indicator lights, unit
not heating
Rice is undercooked
Rice is overcooked
Overflow/Splattering
Burning or plastic
smell
Error Code (E1, E2,
E3, E4)
Possible Cause
Problem with power board
Problem with heating plate
Internal fuse
Problem with power board
Problem with heating plate
Problem with power board
Incorrect amount of rice used
Incorrect amount of water used
Inner Pot is not positioned correctly
Foreign object between inner pot and heating
plate
Damaged Inner Pot
Problem with power board
Problem with sensor
Inner Pot is not positioned correctly
Damaged Inner Pot
Problem with power board
Problem with sensor
Normal Condition
Incorrect amount of rice used
Incorrect amount of water used
Incorrect function used
Normal condition
Power board or sensor failure
Verify that unit is properly plugged in to a
working outlet.
Contact customer service for assistance.
Contact customer service for assistance.
Contact customer service for assistance.
Adjust the amount of rice used.
Adjust the amount of water used.
Make sure it is seated flat and all the way down
in the rice cooker.
Clear any obstructions on the heating plate.
Contact customer service for assistance.
Make sure it is seated flat and all the way down
in the rice cooker.
Contact customer service for assistance.
It is normal for there to be some overflow and
splatter from the steam vent.
Adjust the amount of rice used.
Adjust the amount of water used.
Make sure correct function is chosen.
This will dissipate after the first few uses.
Allow unit to cool off and try it again.
If error code remains, contact customer service
for assistance.
10
Remedy