Before Using For The First Time; Using Your Theater Popper - Westbend STIR CRAZY Manual De Instrucciones

Lid Assembly
Popping Kettle
with Cord
Popcorn
Scoop and Measuring
Cup and Spoon
Please check all packaging material carefully before discarding. Many
accessory parts are contained within the packaging material. Clean all parts
using instructions from the "Cleaning Your Theater Popper" section of this manual.
1. Wash door, seed tray, screen, popcorn scoop, and measuring cup and spoon in
warm, soapy water. Rinse and dry thoroughly. Use a soapy dishcloth to wipe the
interior of the cabinet, then rinse with a damp, non-soapy cloth and dry
thoroughly. Wipe the interior and lid of kettle with a damp, soapy washcloth.
Rinse with a damp cloth and dry thoroughly. Do not immerse kettle in water and
do not get water on the black electrical box or cord.
2. Hang the kettle on the hooks with the handle towards the door. Place the seed
tray in the indent in the bottom of the cabinet floor, then place the screen on top.
Plug the cord from the kettle into the outlet in the ceiling of the popper. DO NOT
plug the kettle directly into a wall outlet.
3. Using the measuring spoon and cup provided, place one spoonful
(1½ tbsp.) of oil into the kettle followed by one or two cupfuls (¼ to ½ cup) of
popcorn kernels, then close lid. Note: DO NOT attempt to pop more than two
measuring cupfuls (½ cup) of popcorn at one time and DO NOT use more than
one measuring spoonful (1½ tbsp.) of oil when popping as damage to the kettle
may occur.
4. Plug the cord from the cabinet into a 120 v, AC outlet ONLY. Close the cabinet
door then turn the "ON/OFF" switch to "ON." The light will illuminate, the stir rod
will spin, and the kettle will begin heating. The tilt door may be left open to scoop
popcorn as it pops, or may be closed until popping is complete.
Tilt Door
B U
EFORE SING FOR THE
U Y
SING OUR
F
IRST
T P
HEATER OPPER
3
Hooks
Cabinet
Door
Seed Tray
and Screen
T
IME