Descargar Imprimir esta página

Tanita D-8000 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

If you are concerned that the scale may not be functioning correctly, please check the following points before requesting repairs.
Problem
"-----" is not displayed when the D-8000
is turned on.
Err C is shown
Err is shown
Lo is shown
Indication
Input
Power Consumption
Temperature Range of usage
USA and Canada
Federal Communications Commission and Canadian ICES Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Canadian
ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Tanita Corporation
may void the user's authority to operate the equipment.
5. Troubleshooting
•Incorrect Pin input for the device you are trying to use.
•The device is off.
•The device's mode is set to USB ONLY
•The device is not in standby mode
•A transmission error has occurred. Turn the display off.
•An error has occurred. Turn the display off.
•Replace the batteries.
6. Specifications
Model
Elements
Number of Keys
Height
Size
Power Source
© 2012 TANITA Corporation. All Rights Reserved.
Check Points
D-8000
7 segments - 5 upper, 4 lower
7 keys
90cm - 250cm (1cm increments)
3feet - 8feet2inch (0.5inch increments)
159 x 209 x 56 mm 6.3 x 8.2 x 2.2inch
AC adapter (included) DC9V 300mA
6 x LR6 - AA Alkaline Battery (Not included)
0.2W
5°C to 35°C 41˚F to 95˚F
Feb 2012-TY D80007601(0)

Publicidad

loading