ACOUSTIC SOLUTIONS THE SINGING MACHINE SMM-107 Manual De Instrucciones página 3

Instructions for Use
1. Insert one (1) active DC 9-Volt battery into microphone by unscrewing
the bottom.
2. Set the switch on the microphone to the STANDBY position.
3. Insert one (1) active DC 9- Volt battery into the slot located in the back of
the receiver.
4. Plug the receiver into the Microphone Input Jack of your Singing
Machine karaoke machine.
5. Set the switch on your Singing Machine karaoke machine to the ON
position.
6. Adjust the Master Volume and Mic Volume Controls of your Singing
Machine to a comfortable level.
7. Set the switch on the receiver to the ON position.
8. Set the switch on the microphones to the top ON position.
Your Singing Machine Wireless Microphone set is now ready for use!
NOTE: The receiver is provided with flexible wire antenna. If reception is
weak, extend the antenna to improve reception.
Maintenance
!
To ensure long battery life, please make sure that both the Receiver and
the Microphone are set to the OFF position when not in use. To be
absolutely certain, we advise you to remove the 9-Volt batteries from
both the Receiver and the Microphone when they are not in use.
!
Please remove the Receiver from the Microphone Input Jack of your
Singing Machine karaoke machine when not in use. This will reduce the
possibility of damage to the Receiver.
E2