Intended Use And Functions Of The Appliance; Before First Use; Assembling And Dismantling The Appliance - Fast SENCOR SBL 2200WH-NAA1 Guia Del Usuario

SBL 2200WH-NAA1 / SBL 2201GR-NAA1 / SBL 2202BL-NAA1 / SBL 2203OR-NAA1 / SBL 2204RD-NAA1 /
SBL 2205VT-NAA1 / SBL 2206YL-NAA1 / SBL 2207TQ-NAA1 / SBL 2208RS-NAA1

INTENDED USE AND FUNCTIONS OF THE APPLIANCE

•
This Smoothie Maker is ideal for preparing fresh fruit or fitness drinks, milkshakes, mixed drinks,
excellent salsa, cream soups, sauces and mixed baby foods. It is equipped with a blade unit with
four high-quality stainless-steel blades and blending container that is made of sturdy tritan material
and also serve as a practical drinking bottle. The lid has a closable spout to allow easy carrying
without spilling. Large bottle fit perfectly into a car cupholder. Anti-slip feet with suction cups
ensure excellent stability when the Smoothie Maker is in use. The bottle, lid and grinder container
unit are dishwasher safe.

BEFORE FIRST USE

1. Remove the appliance and its accessories from the packaging.
2. Thoroughly wash all removable parts intended for contact with food (large blending container
A1, grinder container A7, lid A6 and the blade unit A2 and A8) in warm water with a neutral
dish detergent. Then rinse them with clean water and let them dry or thoroughly dry them with
a soft towel.
Warning:
When cleaning the blade unit A2 or A8, be extra careful to avoid injury. The blade edges A2
and A8 are sharp.

ASSEMBLING AND DISMANTLING THE APPLIANCE

•
Before you begin to assemble or disassemble the appliance, make sure the motor unit A3 is turned
off and unplugged from the wall outlet and the rotating parts are not in motion.
1. Assembling and dismantling the blending container and grinder
1.1 Turn container A1 or A7 so that its neck points upward.
1.2 Place the blade unit A2 or A8 against the neck of container A1 or A7 so that the blades point
into A1 or A7. Screw the blade unit A2 and A8 onto the neck of container A1 or A7. Turn the
assembled container downward with the blade unit A2 and A8.
Note:
Put food and liquids into container A1 or A7 before you attach the blade unit to it A2 or A8.
1.3 To dismantle, proceed in the opposite sequence.
2. Attaching and removing the blending container and grinder from the motor unit
2.1 Place the motor unit A3 on a flat, dry surface, such as a kitchen counter. Onto the motor unit A3,
place the blending container so that the arrow indicator on the blade unit A2 and A8 lines up
with the arrow on the motor unit A3. Turn the blending or grinding unit clockwise until it attaches
firmly to the motor unit A3. If the blending container assembly is correctly attached to the motor
unit A3, it cannot be lifted separately.
2.2 To remove the container from the motor unit A3, proceed in the opposite sequence.
3. Assembling the drinking bottle
To assemble the drinking bottle, screw the lid A6 onto the neck of bottle A1. Firmly tighten the
lid A6. When carrying, make sure the spout is properly closed, so that the bottle's contents do not
spill.
2017
Smoothie Maker
EN-7
07/2017