Publicidad
Idiomas disponibles
Idiomas disponibles
*SOP
Provides the orbital position of the current test point.
COMMAND:
RESPONSE:
*LCD
Provides / adjusts the LCD contrast.
COMMAND:
COMMAND:
RESPONSE:
*FVE
Provides the firmware version of the FPGA
COMMAND:
RESPONSE:
*FVE
Provides the firmware version of the FPGA
COMMAND:
RESPONSE:
*NIT
Provides NIT from current test point.
COMMAND:
RESPONSE:
*SND
Provides / Configures MUTE of the instruments.
COMMAND:
COMMAND:
RESPONSE:
Page 12
USER'S MANUAL. REMOTE CONTROL COMMANDS SATHUNTER
*?SOP<CR>
*SOPs...s<CR>
where s...s is the orbital position of the current test point.
*LCDx<CR>
where x is:
0 starts the LCD (it does an internal reboot of the LCD).
1 <—> F adjust value.
*?LCD<CR>
*LCDx<CR>
where x is the contrast value between 1 and F.
*?FVE<CR>
*FVExx<CR>
where xx is the firmware version of the FPGA.
*?FVE<CR>
*FVExx<CR>
where xx is the firmware version of the FPGA.
*?NIT<CR>
*NITxxxx<CR>
where xxxx is the ID network in hexadecimal notation.
*SNDx<CR>
where x is:
*?SND<CR>
*?SNDx<CR>
where x is:
0 -> Sound OFF.
1 -> Sound ON.
0 -> Sound OFF.
1 -> Sound ON.
06/2008
Publicidad
