Dorel 01621 Guia Del Usuario página 14

Using Your Stroller
To Install Safety 1st or Eddie Bauer Designer 22 Infant Car Seats
2. Insert the rigid end of adapter bar
through hole in fabric and into
hole inside stroller frame.
Push in spring end and insert
through hole in fabric, then into
the hole on the other side. Test to
make sure bar is securely installed.
NOTE: Make sure no fabric is
caught between the ends of the
adapter bar and holes in frame.
3. Car seat must be in rear-facing
position. Lower the car seat down
so the rear rests inside the child's
tray. The channel at the front of
the car seat should rest on the
adapter bar.
4. Press down in the well of the
car seat onto the adapter bar.
Car seat will click when locked
in place.
12
2
3
4