Lock Mode - Hammerhead HLCLG01 Manual Del Usuario

OPERATION

5. LOCK MODE

This mode cannot be used to perform horizontal or vertical leveling, because the
laser lines are no longer self leveling. In this mode, the LED indicator will always
illuminate in red.
a. Keep the power switch in the "OFF" position and press the mode button
to turn on the laser. The laser lines are now locked, and are no longer self-
leveling.
b. Press the mode button repeatedly to change the laser-projection mode.
c. Tilt your compact self-leveling cross line laser to project a straight line at the
desired angle. In this mode, the laser lines are projected continuously and
will not blink, even if the slope angle exceeds 4°.
d. To turn the laser off, press the mode button repeatedly until the laser shuts
off.
6. USING WITH THE CLAMP
The highly versatile clamp allows your compact self-leveling cross line laser to
work in more applications, such as mounted on a water pipe, banister, etc.
a. Securely clamp the clamp to a
pole, pipe or other suitable item.
(Fig.5)
COMPACT SELF-LEVELING CROSS LINE LASER WITH CLAMP
5
2 1/4 in.
KNOB1
13