Kettler Fly Instrucciones De Ensamblaje página 4

Before Assembly
USA
Assembly of the Toy Vehicle

Please ensure that the toy vehicle will only be used for playing when assembly has been carried
out correctly, and checked, by an adult.

The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions
carefully before beginning work. Assemble the toy vehicle in the exact sequence shown by the
letters in the diagrams. This is essential for the safe function and use of the wagon.

Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this product.

Ensure that your working area is free of possible sources of danger, for example don't leave any
tools lying around. Always dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with plastic bags!

Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts com‐
pletely against resistance (locking device). Then check that all screw connections have been tight‐
ened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.

When assembling plastic grips: The grips can be pushed onto the handlebars more easily if they
are first soaked in warm water.

Please keep original packaging of this article, so that it may be used for transport at a later date, if
necessary.

For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of
tubing plugs).
Spare Parts listed at back of manual
When ordering spare parts, always state the full article number, position number, the
quantity required.
Example order: Model # T8852-XXX/ position no. 2/1 piece
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary. Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if possible. It is important to
provide a detailed defect description / damage report! Important: spare part prices do not
include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this arti-
®
cle correctly and safely (local refuse sites).
KETTLER International Inc. · 1355 London Bridge Road · VA 23453 USA
®
www.kettlerusa.com
4
7A
7B
7C
21